Gönderen Konu: access to phone sd card ???  (Okunma sayısı 963 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.


  • Yeni

  • Çevrimdışı
  • *

  • 4
    • Profili Görüntüle
access to phone sd card ???
« : 08 Ocak 2015, 16:37:21 »
how can i access to my phone sd card on pisi linux ?
i conected my phone by usb cable and choose massstorage , but nothing happend
google say we need "mtp-tools" package
but this package is not available in pisilinux repo
any idea ?
« Son Düzenleme: 08 Ocak 2015, 16:39:50 Gönderen: ultra »


  • Genel Yönetici

  • Çevrimdışı
  • *****

  • 49
  • Cinsiyet

    • Profili Görüntüle
Ynt: access to phone sd card ???
« Yanıtla #1 : 11 Ocak 2015, 13:32:44 »
First, cables break. If you have another cable, please test it.

Second, usb ports  in different systems can behave differently by the voltage they provide to the device.  So, try another usb port on your system if you have.

If you still can't access it, then open a konsole application, because following commands has to be issued from command line. Search "konsole" from the start menu.

First thing to check from command line is is your phone is found by the usb. Issue command "lsusb". If it is not installed, install it with  "sudo pisi it usbutils". lsusb command will provide an output like this:

[email protected]_linux1 gui $ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 1d57:0016 Xenta
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 002: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

If the phone is properly identified as a storage medium, you should see it  by issuing the command "sudo fdisk -l".   This command will display the storage devices connected to your system.

If you see your phone's storage in the list, but can't use it, please check the output  of the  "mount"  command.  This command will display the mounted storage devices.  If you see the device name in the output, also you will see the mount point at the same line.

If you see the device with fdisk command but couldn't find it in mount output, then try to mount it by hand. If fdisk reports it as /dev/sdb1,  then issue the command  "sudo mount /dev/sdb1 /mnt" and  go to /mnt folder to see if you are succeeded.

Let's see the outputs of the above commands from your system.


Sistem Yöneticisi, Kraliyet Teknik Universitesi, Stokholm, Isvec


Yukarı Çık & Back to Up